Quality Assurance Checklist
Order Number
Date:
Model:
Built By:
Serial Number:
Comments:
Operation
Running Direction as seen from Impeller.
Operational Rotation
CCW
Return to Production
Condition
New Unit
Rebuilt
Electrical Measured Inspection
Running Voltage and Current Inspection
Operating Voltage
While Running
Operating Voltage
before start
Running current
(impeller installed)
Temperature at impeller
shaft after 5 minute
120 Volts +/- 5
Greater than 125 Volts
Less than 115 Volts
120 Volts +/- 5
Greater than 125 Volts
Less than 115 Volts
5.25 amps + / - .35
5.75 amps + / - .25
Greater than 6.00 amps
Less than 4.80 amps
150 +/- 10 °F
Greater than 160 °F
Less than 140 °F
Visual Inspection
Overall Appearance
- Impeller and Screen – installed
YES
N/A
- Unit Clean and Solid
YES
Not Exceptable
- Grinding Ring installed
YES
N/A
- Belts Adjustment – Full Tension
YES
Adjusted
- Base – Aligned with Cyclone Body
YES
NO (Return to Production)
- Label On Front Of Mill Base
YES
NO (Return to Production)
- Label On Back Of Mill Chamber
YES
NO (Return to Production)
- Base Plate Installed
YES
NO (not required)
- Air Septerator Installed
YES
NO (Return to Production)
- on / off switch (straight)
YES
NO (Return to Production)
Auditable Inspection
Reject for abnormality
- Rattle
None Unit tight
Return to Production
- Vibration
Passed (Normal)
NO Failed ( Return to Production )
- Safety Switch Operable (both conditions On/Off)
YES Normal
NO Failed ( Return to Production )
- Normal Start
YES Normal
NO Failed ( Return to Production)
Packaging
Accessories Included and Properly Boxed
- Inner Box Includes Paperwork
Checked - OK
- Outer box includes shipping docs.
Checked - OK
- Mill box Includes Standard Accessories.
YES (Checked Against Invoice)
- Ship to address correct
YES (Checked Against Invoice)
Inspected By:
Select
Laird
Bill
Gary
none
save